Polished inserts to lengthen the stock steering racks for 2 inch (5.08 cm) for Suzuki Intruder VZR1800 / M1800R or M109R Boulevard.
Polished metal inserts of the maximum size (2 inches = 5.08 cm) for extending the steering column racks Suzuki Intruder VZR1800 / M1800R or Boulevard M109R.
The inserts are designed to adjust the distance from the stock steering wheel to the driver. When these inserts are installed, the steering wheel is 2 inches closer to the driver and the seat is seriously changed! These inserts are especially recommended for drivers up to 180 cm tall, as they greatly facilitate long-distance travel by unloading the shoulder girdle and reducing the load on the lower back.
Design options:
The inserts are available in our own production, both polished (gray) and black.
Specification:
The height of these inserts is 2 inches (5.08 cm). When installing this pair of inserts, it is necessary to additionally purchase extended clutch and gas cables, as well as long front brake hoses, since the stock length will not be enough when the steering wheel is fully turned. You can also purchase a set of extended cables on our website at this link...
Installation Features:
Before installing, please note that the handlebar spacers have four sides each, which are slightly different in width! Turn them so that they match the steering column as much as possible, because the pillars themselves also have non-symmetrical faces.
If you just attach the spacers to the steering wheel, they will not fit in diameter and the steering wheel will not fall into them, because it fits there tightly only when the bolts are tightened! When you tighten the clips with bolts, you can make sure that the spacers fit perfectly!
Tighten the bolts first on the top (about 2/3), and then on the bottom (about 3/4). Next, tighten the upper bolts to the maximum so that the gap between the steering wheel clips and the spacers disappears. Then tighten the lower bolts. Please note that there will be a large gap under the steering wheel, between the clips and spacers - it is standard! Before installing the spacers, look under the steering wheel and see that the steering wheel clips from below have a regular slot - this is necessary so that the steering wheel is clamped! After installing our spacers, the gap will remain, and it is a regular one, not a defective product!
When installing the spacers, do not forget to adjust the vertical position of the steering wheel, and then adjust the position of the levers and mirrors.
Delivery:
Delivery is carried out throughout Russia, to the countries of the former Soviet republics and Europe. If you wish, you can choose to send by regular mail, EMS, or another shipping company upon order approval. The shipping cost is calculated upon receipt of information about the recipient's city and depends on the size and weight of the cargo.
It is also possible to pick up an order from Pushkino, Moscow region, or deliver it by courier within the MKAD (subject to agreement).
Learn more about payment and delivery...
After receiving the order, do not forget to leave your feedback.
