ru en

Reinforced CLASSIC bracket for the turn signals and license plate instead of standard plastic mount for Suzuki VZR1800 / M109R / M1800R or VZ1500 / M90 +VIDEO INSTRUCTION!

price: 4 650 р.

Reinforced CLASSIC bracket for license plate and turn signals instead of the standard "tail" of Suzuki Intruder VZR1800 / VZ1500 or Boulevard M109R / M90 motorcycles.

This card (pictured) shows a bracket for the NEW Russian license plate format, but we can also make a bracket for the old Russian format, as well as for any European, American and other license plate formats!

By installing this bracket, you will securely fix the license plate and open the rear wheel even more, without the threat of throwing dirt on your back! Also, this bracket will be useful for those who are going to return the number to its regular place, and the original underwing has already been sawn off...

It is no secret that the stock "tail" on which the number and illumination of the Suzuki VZR1800 / M109R / M1800R or VZ1500 / M90 are attached is designed for European license plates and is designed for their size and weight. When installing the Russian model, there is a large "windage" of this plastic underwing. In combination with the constant vibration when adding "gas", as well as on the road, with any small hole, the plastic underwing has a constant "swing". This process leads to the appearance of a vertical crack on the plastic of the underwing and its subsequent splitting into two parts. It is for this reason that the Suzuki VZR1800 / M109R / M1800R or VZ1500 / M90 number is transferred to the metal bracket in the wheel with the options of which you can find at this link...

But in the case of using side cases on a motorcycle, placing the number in the wheel is not possible. In this case, this version of the bracket will be useful to you, as well as in the case of the principal use of the license plate in the regular place.

Complete products:

The bracket is made in Russian production from high-quality metal with a thickness of 3 mm and in powder coating!

To install the bracket, you must remove the plastic inner fender and cut off part of it with "ears" turn signals and the lower mount of the room and backlight (dividing the wheel into two parts). After "cutting" the excess plastic and installing the rest of the fender in the regular place, you will find the bottom of the fender free holes for two bolts. It is in these holes that a new metal bracket for fixing turn signals is installed, and the license plate mount is already screwed to it. Thus, your license plate will rise significantly higher to the wing, and all fasteners, including turn signal mounts, will be replaced from plastic to metal.

Video instructions for installing a similar "collapsible" bracket - the installation procedure for this bracket is completely identical.

Delivery is carried out throughout Russia, in the countries of the former Soviet republics and Europe. At your request, you can choose to send by regular mail, EMS or other transport company when approving the order. The cost of sending is calculated when receiving information about the recipient's city and depends on the size and weight of the cargo.
It is also possible to pick up the order from Pushkino, Moscow region or delivery by courier within the Moscow Ring Road (subject to approval).

Learn more about payment and delivery...

After receiving the order, do not forget to leave your feedback.

Article 00546
To order only this item:
protect code
ru en