Reinforced COLLAPSIBLE bracket for the turn signals and license plate instead of standard plastic mount for Suzuki VZR1800 / M109R / M1800R or VZ1500 / M90 +VIDEO AND VIDEO INSTRUCTION!

Reinforced COLLAPSIBLE bracket for the license plate and turn signals instead of the standard "tail" of Suzuki Intruder VZR1800 / M1800R / VZ1500 or Boulevard M109R / M90 motorcycles.

Specification:
It's no secret that the standard part of the rear wing ("tail"), on which the Suzuki VZR1800 / M109R / M1800R or VZ1500 / M90 license plate and backlight are mounted, vibrates very seriously not only when driving, but even just with the engine running. The "sailiness" of the license plate, the weight of the frame and fasteners create a large load on the plastic mount, and the installation of an "evil" direct current practically guarantees destruction. of this design. To be more specific, these factors lead to the appearance of a vertical crack on the plastic of the wing and its subsequent splitting into two parts.

It is for this reason that on Suzuki VZR1800 / M109R / M1800R or VZ1500 / M90, the number is transferred to a metal bracket in the wheel, the options of which you can find at this link... However, in the case of using side trunks on a motorcycle, it is not possible to place the number in the wheel. In this case, this bracket option will be useful to you, as well as in the case of the basic use of the license plate in its regular place.

In this model, the license plate bracket and the turn signal bracket are separate parts and can be installed independently of each other! If you remove the standard turn signals, you can leave only the license plate bracket (see the video and photo in the product card), and if you use another number bracket in the wheel and remove the standard plastic tail, you can install the turn signal mounting bracket separately without installing the complete number bracket (see photos and installation videos).

MAT / GLOSS:
You can choose a matte black or glossy bracket color. You can specify your wishes in the comments to the order.

Manufacturing:
The bracket is manufactured in Russia from high-quality metal with a thickness of 3 mm and powder coated!

Package contents:
A metal turn signal mounting bracket and a compatible license plate bracket with washers.

Installation:
To install the bracket, remove the plastic wing cover and cut off its part with the "ears" of the turn signals and the lower part with the number and backlight (dividing the wing cover into two parts). After "cutting off" the excess plastic and installing the rest of the fender in its original place, you will find two bolt holes at the bottom of the fender. It is in these holes that the new metal bracket for fixing the turn signals is installed, and the license plate holder is already screwed to it. This way, your license plate will rise significantly higher to the wing, and all fasteners, including turn signal fasteners, will be replaced from plastic to metal.

Video instructions for installing the bracket.



Delivery:
Delivery is carried out throughout Russia, to the countries of the former Soviet republics and Europe. If you wish, you can choose to send by regular mail, EMS, or another shipping company upon order approval. The shipping cost is calculated upon receipt of information about the recipient's city and depends on the size and weight of the cargo.
 
It is also possible to pick up an order from Pushkino, Moscow region, or deliver it by courier within the MKAD (subject to agreement).

Learn more about payment and delivery...

After receiving the order, do not forget to leave your feedback.