Custom BLACK compact front LED turn signals with "BRIGHT FLASH" running lights (pair) for Suzuki Intruder VZR1800 / M1800R or Boulevard M109R / BOSS.
Specification: These turntables are designed for those who want to minimize the protruding elements of their bike.
Usually, this problem is solved from behind by installing a custom headlight with integrated turn signals, or a multifunctional diode horseshoe under the wing or under the passenger seat / seat cover, but at the same time there is a question of removing the front pair of turn signals... It is to solve this difficult task that the wonderful BRIGHT FLASH turn signals were invented, which exactly repeat the standard side landing pads of turn signals and their design. In the off state, these turn signals are difficult to detect on a motorcycle, and when the turn signal is turned on, they become very noticeable!
These turn signals are made in the USA from high-quality transparent plastic, and the built-in bright LEDs, when turned on, transmit light to the entire surface of the plastic from the inside. When the turn signal is turned on, it seems that the plastic geometric cones on the sides of the head lamp are flashing - this is very unusual and stylish! At the same time, the side of the turn signals remains opaque. Turn signals are installed on a "thermonuclear" double tape, which is pasted on them by the manufacturer.
Equipment: Included with the turn signals is a special wiring that allows you to connect them not only as turn signals, but also as running marker lights.
By connecting turn signals with the function of running lights, you get their constant bright orange glow with the turn of the ignition key, and when the turn signal is turned on, they will flash. The wiring for connecting the turn signals as parking lights can not be used and only the function of turn signals can be left...
Recommended additions: If you are planning to install any LED turn signals, then to normalize the frequency of their flashing, it is recommended to purchase a tuning relay of turn signals or a redesigned standard version...
Before the appearance of this type of relay, special loads were used that needed to be soldered into the electrics, but this is already in the past - the standard relay is simply replaced with a tuning relay and nothing needs to be soldered.
You may be interested in removing the rear turn signals and installing a diode horseshoe under the stock rear wing of the motorcycle instead... It is possible to remove the rear protruding turn signals and replace them with a multifunctional diode "horseshoe" under the passenger seat plug or under the passenger seat itself...
Delivery is carried out throughout Russia, to the countries of the former Soviet republics and Europe.
At your request, you can choose to send by regular mail, EMS or another transport company when approving the order. The cost of shipment is calculated upon receipt of information about the recipient's city and depends on the dimensions and weight of the cargo.
It is also possible to pick up the order from Pushkino, Moscow region or delivery by courier within the MKAD (subject to approval).
Learn more about payment and delivery...
After receiving the order, do not forget to leave your feedback.